浙江省城镇建设用地空间扩展时空特征分析

运用1990~2015年浙江省6期土地利用数据, 使用扩展速率、扩展强度、分形维数等指标分析浙江省城镇建设用地空间格局. 结果表明 (1)1990~2015年, 浙江省城镇建设用地增长在5个时期呈现“W”趋势, 从不同行政等级来看, 扩展速度的发展趋势具有一致性, 2000~2005年是浙江省不同行政等级的城市城镇用地扩展速度的最快阶段. (2)从扩展强度来看, 浙江省在2000~ 2005年对城镇用地扩展最大, 其他时期基本维持稳定. 地势平缓的城市往往开发强度大, 丘陵地区的城市处于缓慢扩展阶段. (3)浙江省城镇用地空间结构的分形维数和稳定性特征存在波动性. 城镇用地的空间结构特征与城镇用地增长过程和发展阶段具有一定的联系. (4)浙江省城镇用地重心受到地形限制明显. 西南地区受到丘陵地形影响, 重心移动方向大多数与斜长的峡谷平行; 北部平原区域的城镇用地的重心变化往往受到经济等社会因素影响较大. (5)浙江省城镇建设用地空间扩展的影响因素上存在一定规律, 可看出1995年、2010年、2015年主要倾向于社会经济的影响, 在2000年、2005年则倾向于自然因素的影响.     

人教版高中化学必修教科书的内容呈现方式及特点分析*

高中化学教科书是发展学生化学学科核心素养的重要载体和资源平台。依据《普通高中化学课程标准(2017年版)》编写的人教版普通高中化学必修教科书作为分析文本,着重从栏目系统、图像系统、习题系统角度对其呈现方式进行分析,具体特点表现为:栏目系统强化功能性,图像系统凸显直观性,习题系统体现针对性、情境性、开放性,以期为高中化学教师有效使用教科书、落实化学学科核心素养的培养发挥积极作用。     

复杂换热网络MINLP中的非线性特性分析

针对复杂换热网络MINLP问题,本文应用多维函数渐变法探索和分析了连续变量和整型变量引起的网络性能非线性和非凸特性。研究表明,当系统规模增大时,不但连续变量的叠加效应将增加系统的非线性,整型变量将使得非线性特性更为严重。     

Mechanochemical synthesis of PbS/Ni–Cr layered double hydroxide nanocomposite

1. Download : Download high-res image (140KB)
2. Download : Download full-size image

     

多孔活性自燃金属的光谱辐射特性研究

多孔活性金属材料因为内部存在大量的孔隙，大大地增加了与空气的接触面积，使得其在空气中的燃烧较为猛烈，燃烧温度迅速上升。其燃烧过程属于固体燃烧的范畴，较为复杂。以镁为例，通过建立燃烧模型，来研究多孔活性金属的光谱辐射特性。首先，建立氧气总消耗量与活性金属剩余质量的关系，研究氧气在活性金属孔隙内的扩散浓度关系，通过求解活性金属热平衡方程得到活性金属燃烧过程中温度与时间的关系式，进而得到活性金属的峰值光谱辐射强度表达式；然后，将模型计算的仿真结果与红外热像仪测得的实验结果对比，结果表明，模型的计算结果与实验结果相一致，误差在了10%以内；最后，通过建立的燃烧模型来研究活性金属燃烧规律以及其光谱辐射特性，解决了高空、高速下的活性金属光谱辐射强度难以实验获得的问题，大大减小了实验成本与时间。分别对比不同时间活性金属箔片在1～3，3～5以及8～12 μm波段下的辐射强度，得出活性金属燃烧时的辐射强度主要集中在3～5 μm波段的结论。研究结果表明：自燃金属最大燃烧温度随高度的增加逐渐下降，随气流速度的增加先增加后减小，在速度为30 m·s-1时，温度达到最大；自燃金属的光谱辐射强度在2～6 μm波段达到最大。该模型也可以用来研究其他活性金属的燃烧特性。     

A new characteristic approach for incompressible thermo‐flow in Cartesian and non‐Cartesian grids

A virtual‐characteristic approach is developed for thermo‐flow with finite‐volume methodology in which a multidimensional characteristic (MC) scheme is applied along with artificial compressibility. To obtain compatibility equations and pseudo‐characteristics, energy equation is taken into account in the MC scheme. With this inherent upwinding of convective fluxes, no artificial viscosity is required even at high Reynolds numbers. Another remarkable advantage of the MC scheme lies in its faster convergence rate with respect to the averaging scheme that is found to exhibit substantial delays in convergence. As benchmarks, forced and mixed convections in a cavity and in flow over cylinder and between parallel plates are examined for a wide range of Reynolds, Grashof, and Prandtl numbers. The MC and averaging schemes are applied for simulation purposes. Results show the better performance of the MC scheme in forced and mixed convections. Results confirm the robustness of the MC scheme in terms of accuracy and convergence. Copyright © 2015 John Wiley & Sons, Ltd.     

Influence of growth temperature and post-annealing on an n-ZnO/p-GaN heterojunction diode

We report on an n-ZnO/p-GaN heterojunction diode fabricated from zinc oxide (ZnO) films at various growth temperatures (450, 500, 550, and 600 °C) by RF sputtering. The films were subsequently annealed at 700 °C in N₂ ambient. To investigate the influence of the growth temperature of n-ZnO films, the microstructural, optical, and electrical properties were measured using scanning electron microscopy (SEM), X-ray diffraction (XRD), photoluminescence (PL), and Hall measurements. The XRD pattern showed the preferred orientation along the c-axis (002) regardless of growth temperature. The PL spectra showed a dominant sharp near-band-edge (NBE) emission. Current–voltage (I–V) curves showed excellent rectification behavior. The turn-on voltage of the diode was observed to be 3.2 V for the films produced at 500 °C. The ideality factor of ZnO film was observed to be 1.37, which showed the best performance of the diode.     

The identification of the vibration control system parameters designed for continuous miner machines

The Continuous Miner machines are exposed to time dependent loads during normal operation of the rock cutting process. These loads cause vibrations, which have a negative influence on the whole structure of the machine. This phenomenon can be eliminated by applying passive or active vibration control systems (VCS). Generally these systems are coupled with additional elements, which provide dispersion or transfer energy. The energy thus acquired can also reinforce the intended function such as rock cutting operation in the case of mining machines. The objective of this paper is to present the method of numerical identification of VCS parameters for Continuous Miner machines. The main function of the presented system is to reduce displacement of cutting drum by using elastic element joined to machine chassis and applying appropriate algorithm of control of the angular velocity of cutting drum. The method described improves efficiency of mining and increases durability of machine. In order to determine mechanical and control parameters of VCS the genetic algorithm optimisation method conjugated with numerical modal analysis was used. Finally the transient dynamic analysis was performed for the full-scale model of Continuous Miner in order to verify VCS in normal working condition.     

生物质与烟煤混合灰熔融特性影响因素的研究

为探究气氛、混合比及残炭含量对生物质与煤混合灰熔融特性的影响,将松木屑灰与乌海烟煤灰按不同质量比混合,采用智能灰熔点仪测定各混合灰样在不同气氛下的灰熔融温度,X射线衍射仪从矿物质演变角度分析混合灰熔融温度变化的原因。结果表明,由于铁尖晶石和铁橄榄石的生成,使混合灰的熔融温度在弱还原性气氛下比氧化性气氛下低,且差值的大小与混合灰中Fe含量有关;随松木屑灰含量的增加,钙铝黄长石、镁黄长石、白榴石等低温共熔物的生成量增加,使混合灰的熔融温度降低;此外,由于Fe-C共熔体(Fe_xC_y)的生成、灰锥局部还原性气氛及残炭的"骨架"作用,使混合灰的熔融温度随煤灰中残炭含量的增加呈现先升高后降低再升高的趋势。